Metrohm viva 1.0 (process analysis) - Manual (Page 724)

6.8 Colorimetric sensors subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
712 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the working life of the sensor has expired is auto-
matically saved in the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued, then the message
that the working life of the sensor has expired will be saved automati-
cally with the determination.
Cancel determination
The ongoing determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
6.8 Colorimetric sensors subwindow
6.8.1 Colorimetric sensors - General
Subwindow: Configuration ▶ Colorimetric sensors
The Colorimetric sensors subwindow contains the data for colorimetric
sensors in tabular form. It can be shown in the Configuration program
part as a part of the configuration view or (if not present in the user inter-
face) in a separate window with View
▶ Quick access. The subwindow
can be enlarged and reduced as required; it can also be maximized.
6.8.2 Table - Colorimetric sensors
6.8.2.1 Table - Colorimetric sensors
Subwindow: Configuration ▶ Colorimetric sensors
Contents
The following information about the colorimetric sensors is shown as the
default setting in the table:
Name
Name of the colorimetric sensor.
Calibration date
Shows the date and time of the last calibration entered after each auto-
matic calibration or manual entry.
Wavelength
Wavelength at which the calibration of the instrument has been carried
out.