Metrohm viva 1.0 (process analysis) - Manual (Page 596)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
584 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Start base point
Shows the start base point at which the baseline begins.
End base point
Shows the end base point at which the baseline ends.
Modifies the sequence of shown substances by moving the selected line
upward.
Modifies the sequence of shown substances by moving the selected line
downward.
Edit menu
Properties... Edit baseline parameters of the selected substance (same action as double-click
on the line). The properties window opens for entering the baseline parameters
(see Chapter 5.6.3.5, page 584).
5.6.3.5 Editing baselines
Subwindow section: Method ▶ Evaluation ▶ Substances ▶ Recogni-
tion ▶ [Edit] ▶ New... / Properties... ▶ Substances - Baseline
Measuring command
Shows the measuring command for the substances of which the baselines
can be defined.
Substance
Shows the substance name.
Base line
Baseline type
Selection of the baseline type with which the evaluation is to take place.
Selection horizontal | Horizontally through 0
Default value horizontal
horizontal
Forced, horizontal baseline starting from the automatically determined
or manually specified end base point.
Horizontally through 0
Forced, horizontal baseline through point of origin.