Metrohm viva 1.0 (process analysis) - Manual (Page 531)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 519
5.5.2.8.8 HEATER
5.5.2.8.8.1 HEATER - Overview
Dialog window: Method ▶ HEATER ▶ Properties... ▶ HEATER - 'Command name'
Command for the control of the heater.
Instruments
This command can be executed with the following instruments:
Photometer: 089
Appearance
The command has the following appearance:
Parameters
The parameters for the HEATER command are configured in the follow-
ing dialog window:
￭ HEATER - Properties
Command variables
The following command variables are generated by the HEATER com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
5.5.2.8.8.2 HEATER - Properties
Dialog window: Method ▶ HEATER ▶ Properties... ▶ HEATER - 'Command name'
Command name
Name of the command.
Entry 25 characters