Festo Контроллер позиционирования CPX-CMAX - Manual (Page 419)

C. Configuration with CPX node
C−21
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
C.2.3 Addressing
Assign the I/O addresses of the slave
(RSNetworx example)
1. Double−click on the scanner in the network. A dialog box
will open.
2. With the registers Input" and Output", you assign the
I/O addresses of the CPX terminal to the PLC operands.
Fig. C/8: Input address assignment