Festo Контроллер позиционирования CPX-CMAX - Manual (Page 139)

4. Faults and diagnostics
4−3
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
4.1 Overview of diagnostics options
The CMAX supports a number of different options for diagĆ
nostics and error handling in the CPX terminal.
An overview is shown in Tab. 4/1.
Access/
Function Diagnostics
option Brief description Detailed
description
Local
Display on the
device LED display, disĆ
play / 7−
segment display The LEDs and the display directly indiĆ
cate operating and fault statuses.
Fast on −the−spot" diagnosis. CMAX system
description
CPX−MMI The CPX−MMI can be used to display the
CPX module diagnosis
1) .
Description of the
CPX−MMI
Local
with PC (e.g.
during startup) FCT with CMAX
plug−in Plain−text display of all diagnostic inĆ
formation during startup and servicing.
Full access to the diagnostic functionalĆ
ity of the CMAX. Help for the CMAX
FCT PlugIn
CPX−FMT The CPX−FMT can be used to display the
CPX module diagnosis
1) .
Help for the CPX−FMT
PLC
via I/O data Module output
and input data Diagnostic information is constantly
transferred in the SCON status byte
(e.g. actual values, WARN and FAULT
bits etc.). Direct access to the status
(e.g. current position) and diagnostic
status via the CPX node. Section 2.2
CPX status bits,
I/O diagnostic
interface The CPX module diagnosis 1) is reported
to the CPX node Optimum integration
into the CPX module concept.
Section 4.5
PLC
via communiĆ FHPP diagnostics Diagnostic parameters Section 4.3
via communiĆ
cations profile
Diagnostic memory Section 4.3.2
1) The CPX diagnostics only show the fault groups of the CMAX.
Tab. 4/1: Diagnostics options