Festo Контроллер позиционирования CPX-CMAX User Manual
Page 222
5. Parameter
5−34
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Reserved
PNU
PNU: 204
Index: 2
Max index: 5
Class: Struct
Data type: int32
Values
Without unit
Default: 2
Minimum: −
Maximum: −
Reserved. Is not used by the CMAX.
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
Clear memory
PNU
PNU: 204
Index: 3
Max index: 5
Class: Struct
Data type: int32
Values
Without unit
Default: 0
Minimum: 0
Maximum: 1
Write 1: The entire diagnostic memory is deleted. Reading always delivers the value 0.
Deleting is usually not required, since the memory is organised as a ring buffer. If the memory is full,
the new entry overwrites the oldest.
o
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
Number of entries
PNU
PNU: 204
Index: 4
Max index: 5
Class: Struct
Data type: int32
Values
Without unit
Default: 0
Minimum: −
Maximum: −
Number of assigned entries in the diagnostic memory.
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.