Festo Контроллер позиционирования CPX-CMAX - Manual (Page 263)

5. Parameter
5−75
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Valve type
PNU PNU: 1120 Index: 1 Max index: 1 Class: Var Data type: int32
Values Without unit
Default: 0 Minimum: 1 Maximum: 5
The valve type is read from the valve. The type is always recognized. If the valve delivers no known
type, a fault (E04) is generated. The valve is not commissioned in this case.
ID
Valve type
0 Not configured
1 VPWP−2
2 VPWP−4
3 VPWP−6
4 VPWP−8
5 VPWP−10
o The parameter value cannot be changed.
ý Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
ý After writing, controller recalculation is carried out.
Valve serial number
PNU PNU: 1121 Index: 1 Max index: 1 Class: Var Data type: bitarray
Values Default: 0000 0000 0000 0000 0000 0000 0000 0000
Write: −
Each valve has a unique serial number.
The serial number is important for identifying exchanged hardware, see appendix A.3.
o The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.