Festo Контроллер позиционирования CPX-CMAX - Manual (Page 179)

4. Faults and diagnostics
4−43
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Diagnostic event 8: Configuration
A configuration/commissioning operation was executed.
Diagnostic number
No. Description
1 Firmware was updated.
2 Data reset: All user and controller data was deleted.
3 Movement test carried out.
4 Static identification executed.
5 Static and dynamic identification executed.
6 Identification reset, identification data were deleted.
Additional information
Info Description
Byte 1 = 1: Successfully carried out
= 2: Execution cancelled
Byte 2 reserved
Byte 3 + 4 Duration of the function in 0.1 seconds