PLANET XGS3-24042 - Manual (Page 995)

50-1
Chapter 50 Commands for AM
Configuration
50.1 am enable
Command:
am enable
no am enable
Function:
Globally enable/disable AM function.
Default:
AM function is disabled by default.
Command Mode:
Global Mode.
Example:
Switch(config)#am enable
Disable AM function on the switch.
Switch(config)#no am enable
50.2 am port
Command:
am iport
no am port
Function:
Enable/disable AM function on port.
Default:
AM function is disabled on all port.
Command Mode:
Port Mode.
Example:
Enable AM function on interface 1/0/3 of the switch.
Switch(Config-If-Ethernet 1/0/3)#am port
Disable AM function on interface 1/0/3 of the switch.