PLANET XGS3-24042 - Manual (Page 369)

20-8
IP shutTime(seconds)
1.1.1.2 132
Trust IP:
192.168.99.5 255.255.255.255
192.168.99.6 255.255.255.255
20.11 debug anti-arpscan
Command:
debug anti-arpscan [port | ip]
no debug anti-arpscan [port | ip]
Function:
Enable the debug switch of ARP scanning prevention; ”no debug anti-arpscan [port | ip]”
command disables the switch.
Default Settings:
Disable the debug switch of ARP scanning prevention
Command Mode:
Admin Mode
User Guide:
After enabling debug switch of ARP scanning prevention users can check corresponding debug
information or enable the port-based or IP-based debug switch separately whenever a port is closed
by ARP scanning prevention or recovered automatically, and whenever IP t is closed or recovered .
Example:
Enable the debug function for ARP scanning prevention of the switch.
Switch(config)#debug anti-arpscan