PLANET XGS3-24042 - Manual (Page 749)

44-24
no debug pim timer joinprune jt
no debug pim timer joinprune kat
no debug pim timer joinprune ot
no debug pim timer joinprune plt
no debug pim timer joinprune ppt
no debug pim timer joinprune pt
no debug pim timer joinprune
no debug pim timer register rst
no debug pim timer register
Function:
Enable or Disable each pim timer
Default:
Disabled
Command Mode:
Admin Mode.
Usage Guide:
Enable the specified timer’s debug information.
Example:
Switch# debug pim timer assert
Switch#
44.3.10 ip mroute
Command:
ip mroute <A.B.C.D> <A.B.C.D> <ifname> <.ifname>
no ip mroute <A.B.C.D> <A.B.C.D> [<ifname> <.ifname>]
Function:
To configure static multicast entry. The no command will delete some static multicast entries or
some egress interfaces.
Parameter:
are the source address and group address of multicast.
<ifname> <.ifname>, the first one is ingress interface, follow is egress interface.
Default:
To delete this static multicast entry, if the command isn’t included interface parameter.
Command Mode:
Global Mode.
Usage Guide: