PLANET XGS3-24042 - Manual (Page 1057)

58-10
Usage Guide:
After the configured lifetime period is overtime, the port is still at down state, the binding of this port
will be deleted. If the port state is changed from down to up state during the configured lifetime
period, the binding of the port will reset it as lifetime period of BOUND state. If the configured
parameter is 0 second, all binding of the port will be deleted immediately.
Example:
Set bind-protect lifetime period to be 20 seconds.
Example:
Switch(config)#savi timeout bind-protect 20
58.2 Commands for Monitor and Debug
58.2.1 Monitor and Debugg
58.2.1.1 debug ipv6 dhcp snooping binding
Command:
debug ipv6 dhcp snooping binding
no debug ipv6 dhcp snooping binding
Function:
Enable binding debug of dhcp type for SAVI, no command disables the debug.
Command Mode:
Admin Mode.
Usage Guide:
After enable this function, the relative binding of dhcp type or static type create the print information
for misarranging. The no command disables this function.
Example:
Enable the binding debug of dhcp type.
Switch#debug ipv6 dhcp snooping binding
58.2.1.2 debug ipv6 dhcp snooping event
Command:
debug ipv6 dhcp snooping event
no debug ipv6 dchp snooping event