PLANET XGS3-24042 - Manual (Page 892)

45-37
45.3.36 show ipv6 pim neighbor
Command:
show ipv6 pim neighbor [detail|]
Function:
Display router neighbors.
Command Mode:
Any Mode
Usage Guide:
Display multicast router neighbors maintained by the PIM.
Example:
Switch(config)#show ipv6 pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode
Fe80::203:fff:fee3:1244 Vlan1 00:00:10/00:01:35 v2 1 /DR
fe80::20e:cff:fe01:facc Vlan1 00:00:13/00:01:32 v2 1 /
Displayed Information Explanations
Neighbor Address Neighbor address
Interface Neighbor interface
Uptime/Expires Running time /overtime
Ver Pim version ,v2 usually
DR Priority/Mode DR priority in the hello messages from the
neighbor and if the neighbor is the interface’s DP
45.3.37 show ipv6 pim nexthop
Command:
show ipv6 pim nexthop
Function:
Display the PIM buffered nexthop router in the unicast route table.
Command Mode:
Any Mode
Usage Guide:
Display the PIM buffered nexthop router information.
Example:
Switch#show ipv6 pim nexthop