10 show mpls vrf-table, Show mpls vrf, Table – PLANET XGS3-24042 User Manual
Page 1181
75-11
75.10 show mpls vrf-table
Command:
show mpls vrf-table [vrf-name]
Function:
Display the detailed information of all configured VRP ingresses.
Command Mode:
Admin and Config mode.
Usage Guide:
Implementing this command will display the detailed information of all configured VRP ingresses. If
there is a specified VRF in the parameter, only details about this ingress will be displayed.
Example:
Switch#show mpls vrf-table
Output for VRF table with id: 1
---------------------------------------------
FTN ID : 1
VrfIndex : 1
Fec : 10.1.1.0/24
Nexthop addr : 0.0.0.0
Owner : BGP
Primary : Yes
Row Status : Active
Exp-bits : 0X0
Incoming DSCP : none
Tunnel ID : 0
Protected LSP id : 0
QoS Resource id : 0
In-Label : 0
In-Interface : N/A
Out-Label : 0
Out-Interface : Vlan20
Admin Status : Up
Oper Status : Up
Oper Code : Deliver to IP
Display
Explanation