PLANET XGS3-24042 - Manual (Page 404)

27-43
Function:
To enable the debugging messages for protocol packets of DHCPv6 prefix delegation client, the no
form of this command will disable the debugging information.
Default:
Disabled.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 dhcp client packet
27.5 debug ipv6 dhcp detail
Command:
debug ipv6 dhcp detail
no debug ipv6 dhcp detail
Function:
To display the debug information of all kinds of packets received or sent by DHCPv6, the no form of
this command disabled this function.
Default:
Disabled.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 dhcp detail
27.6 debug ipv6 dhcp relay packet
Command:
debug ipv6 dhcp relay packet
no debug ipv6 dhcp relay packet
Function:
To enable the debugging information for protocol packets of DHCPv6 relay, the no form of this
command will disable the debugging.
Default:
Disabled.