PLANET XGS3-24042 - Manual (Page 984)

49-2
limitation function debug of neighbor in the VLAN.
Command Mode:
Admin Mode.
Usage Guide:
Display the debug information of the number of dynamic neighbor in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current neighbor count 21 is more than or equal to the maximum limit
in vlan 1!!
49.3 debug switchport arp count
Command:
debug switchport arp count
no debug switchport arp count
Function:
When the number limitation function debug of ARP on the port, if the number of dynamic ARP and
the number of ARP on the port is larger than the max number allowed, users will see debug
information. ”no debug switchport arp count” command is used to disable the number limitation
function debug of ARP on the port.
Command Mode:
Admin Mode
Usage Guide:
Display the debug information of the number of dynamic ARP on the port.
Examples:
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit in port
Ethernet1/0/1
!!%Jun 14 16:04:40 2007 Arp learning will be stopped and some mac will be delete !!
49.4 debug switchport mac count
Command:
debug switchport mac count
no debug switchport mac count