PLANET XGS3-24042 - Manual (Page 329)

19-175
IPv6 ICMP: sent Send IPv6 data report
type <129> Ping protocol No.
Src <2003::1> Source IPv6 address
Dst <2003::20a:ebff:fe26:8a49> Destination IPv6 address
from Vlan1 Layer 3 port being sent
19.2.7 debug ipv6 nd
Command:
debug ipv6 nd [ ns | na | rs | ra | redirect ]
no debug ipv6 nd [ ns | na | rs | ra | redirect ]
Function:
Enable the debug of receiving and sending operations for specified types of IPv6 ND messages.
The ns, na, rs, ra and redirect parameters represent neighbor solicitation, neighbor advertisement,
route solicitation, route advertisement and route redirect. No specification means to enable the
debug for all five types of ND message. The no operation of this command will disable debug of
receiving and sending operations for specified types of IPv6 ND messages, while no specification
means to disable that for all five types of ND message.
Default:
The debug of receiving and sending operations for all five types of IPv6 ND messages is disabled
by default.
Command Mode:
Admin Mode
Usage Guide:
The ND protocol is an essential part of IPv6. This command can display the ND message of a
specified type for troubleshooting.
Example:
Switch#debug ipv6 nd
IPv6 ND: rcvd, type <136>, src , dst
Displayed information Explanation
IPv6 ND: rcvd Receive ND data report
type <136> ND Type
Src Source IPv6 address
Dst Destination IPv6 address