PLANET XGS3-24042 - Manual (Page 674)

37-313
Parameter:
: Neighbor IP address
: Name of the peer group
4: Allowed BGP version, 4 only
Default:
4.
Command Mode:
BGP route mode
Usage Guide:
Only version 4 is supported so far, so whatever the configuration is the version remains at 4.
Example:
Switch(config-router)#neighbor 10.1.1.66 version 4
Switch(config-router)#
37.81 neighbor weight
Command:
neighbor {|} weight <0-65535>
no neighbor {|} weight [<0-65535>]
Function:
Configure the route weight sent from the partner. The “no neighbor {|} weight
[<0-65535>]” command restores the default value.
Parameter:
: Neighbor IP address.
: Name of IP address.
<0-65535>: Weight.
Default:
The default weight acquired from other routers is 0. The default weight on the local static
configuration is 32768.
Command Mode:
BGP route mode
Default:
The default weight acquired from other routers is 0. The default weight on the local static
configuration is 32768.
Usage Guide:
The path selecting can be affected through the configuration of the weight. The weight is only
relevant to the router which is not an attribute transmittable to outside.