PLANET XGS3-24042 - Manual (Page 949)

47-15
Switch (config)#ipv6 access-list 520 permit 2003:1:2:3::1/64
Switch (config)#ipv6 access-list 520 deny 2003:1:2:::1/48
47.13 ipv6 access standard
Command:
ipv6 access-list standard
no ipv6 access-list standard
Function:
Create a name-based standard IPv6 access list; the “no ipv6 access-list
standard”command deletes the name-based standard IPv6 access list (including all
entries).
Parameter:
is the name for access list, the character string length is from 1 to 32.
Command Mode:
Global Mode.
Default:
No access list is configured by default.
Usage Guide:
When this command is run for the first time, only an empty access list with no entry will be created.
Example:
Create a standard IPv6 access list named ip6Flow.
Switch(config)#ipv6 access-list standard ip6Flow
47.14 ipv6 access extended
Command:
ipv6 access-list extended
no ipv6 access-list extended
Function:
Create a name-based extended IPv6 access list; the no command delete the name-based extended
IPv6 access list.
Parameter:
is the name for access list, the character string length is from 1 to 32.
Command Mode: