PLANET XGS3-24042 - Manual (Page 640)

37-279
Admin Mode.
Example:
Switch# debug bgp redistribute message send
Switch# no debug bgp redistribute message send
37.32 debug bgp redistribute route receive
Command:
debug bgp redistribute route receive
no debug bgp redistribute route receive
Function:
To enable debugging switch of received messages from NSM for BGP. The no form of this
command will disable debugging switch of received messages from NSM for BGP.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Example:
Switch#debug bgp redistribute route receive
Switch#no debug bgp redistribute route receive
37.33 debug ipv6 bgp redistribute message send
Command:
debug ipv6 bgp redistribute message send
no debug ipv6 bgp redistribute message send
Function:
To enable debugging switch of sending messages for redistribution of routing information from
external process such as OSPFv3 and others to MBGP4+. The no command will disable the
debugging switch.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Example: