PLANET XGS3-24042 - Manual (Page 1216)

76-34
IP Address Interface
10.1.1.66 Vlan2
76.52 show ldp upstream
Command:
show ldp upstream
Function:
Display information of all upstreams of this LSR.
Command Mode:
Admin and Config mode.
Usage Guide:
Display information of all LDP upstreams maintained by the switch.
Example:
Switch#show ldp upstream
Session peer 192.168.11.50:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50 Attr:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50 Attr:
76.53 show mpls ldp discovery
Command:
show mpls ldp discovery interface [vlan <1-4094> | IFNAME]
Function:
Display all interfaces and label-switching information of this LSR.
Parameters:
<1-4094>: VLAN ID.
IFNAME: The interface name
Command Mode:
Admin and Config mode.
Usage Guide:
Display all or specified interfaces and label-switching information.
Example:
Switch#show mpls ldp discovery