PLANET XGS3-24042 - Manual (Page 1125)

68-9
Example:
Displaying debugging information for SNTP packet.
Switch#debug sntp packet
68.3 sntp polltime
Command:
sntp polltime
no sntp polltime
Function:
Sets the interval for SNTP clients to send requests to NTP/SNTP; the “no sntp polltime” command
cancels the polltime sets and restores the default setting.
Parameters:
is the interval value from 16 to 16284.
Default:
The default polltime is 64 seconds.
Command Mode:
Global Mode
Example:
Setting the client to send request to the server every 128 seconds.
Switch#config
Switch(config)#sntp polltime128
68.4 sntp server
Command:
sntp server { | >} [source {vlan | loopback
no>}] [version ]
no sntp server { | >} [source {vlan | loopback
}] [version ]
Function:
Enable the specified time server as clock source, the no command deletes the specified time
server.
Parameters: