PLANET XGS3-24042 - Manual (Page 1019)

53-1
Chapter 53 Commands for SSL
Configuration
53.1 ip http secure-server
Command:
ip http secure-server
no ip http secure-server
Function:
Enable/disable SSL function.
Command Mode:
Global Mode.
Default:
Disabled.
Usage Guide:
This command is used for enable and disable SSL function. After enable SSL function, the users
visit the switch through https client, switch and client use SSL connect, can form safety SSL connect
channel. After that, all the data which transmit of the application layer will be encrypted, then ensure
the privacy of the communication.
Example:
Enable SSL function.
Switch(config)#ip http secure-server
53.2 ip http secure-port
Command:
ip http secure-port
no ip http secure-port
Function:
Configure/delete port number by SSL used.
Parameter:
means configured port number, range between 1025 and 65535. 443 is for default.
Command Mode:
Global Mode.