PLANET XGS3-24042 - Manual (Page 952)

47-18
Examples:
Create an MAC ACL named mac_acl.
Switch(config)# mac-access-list extended mac_acl
Switch(Config-Mac-Ext-Nacl-mac_acl)#
47.17 mac-ip access extended
Command:
mac-ip-access-list extended <name>
no mac-ip-access-list extended
Functions:
Define a name-manner MAC-IP ACL or enter access-list configuration mode, “no
mac-ip-access-list extended ” command deletes this ACL.
Parameters:
: name of access-list excluding blank or quotation mark, and it must start with letter, and the
length cannot exceed 32 (remark: sensitivity on capital or small letter).
Command Mode:
Global Mode.
Default:
No named MAC-IP access-list.
Usage Guide:
After assigning this command for the first time, only an empty name access-list is created and no list
item included.
Examples:
Create an MAC-IP ACL named macip_acl.
Switch(config)# mac-ip-access-list extended macip_acl
Switch(Config-MacIp-Ext-Nacl-macip_acl)#
47.18 permit | deny (ip extended)
Command:
[no] {deny | permit} icmp {{ } | any-source | {host-source }}
{{ } | any-destination | {host-destination }} [
[]] [precedence ] [tos ][time-range]
[no] {deny | permit} igmp {{ } | any-source | {host-source }}