PLANET XGS3-24042 - Manual (Page 660)

37-299
Parameter:
: Neighbor IP address.
: Name of the peer group.
Default:
Disabled.
Command Mode:
BGP route mode
Usage Guide:
With this attribute, error notify due to unsupported capability negotiation the neighbors required will
not be sent.
Example:
Switch(config-router)#neighbor 10.1.1.64 override-capability
Related Command:
neighbor capability
37.61 neighbor passive
Command:
neighbor {|} passive
no neighbor {|} passive
Function:
Configure whether the connecting request is positively sent in the connection with specified
neighbor; the “no neighbor {|} passive” command restores to positively send
the connecting request.
Parameter:
: Neighbor IP address.
: Name of peer group.
Default:
Positively send the connecting request.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
With this attribute set, the local side will not positively send the TCP connecting request after the
neighbors are configured, but stays in listening mode waiting for the connecting request from
partners.
Example: