PLANET XGS3-24042 - Manual (Page 1155)

72-11
by default.
Source IPv6 address Source IPv6 address.
Repeat count[5] Number of the ping packets.
Datagram size in byte[56] Packet size of the ping command. 56 byte by
default.
Timeout in milli-seconds[2000] Timeout for ping command. 2 seconds by default.
Extended commands[n] Extended configuration. Disabled by default.
! The network is reachable.
. The network is unreachable.
Success rate is 100 percent(8/8),
round-trip min/avg/max = 1/1/1ms
Statistic information, success rate is 100 percent of
ping packet.
72.9 show debugging
Command:
show debugging {bgp | dvmrp | igmp | ipv6 | mld | nsm | ospf | other | pim | rip | spanning-tree
| vrrp}
Function:
Display the debug switch status.
Usage Guide:
If the user needs to check what debug switches have been enabled, show debugging command
can be executed.
Command mode:
Admin Mode
Example:
Check for currently enabled debug switch.
Switch#show debugging ospf
OSPF debugging status:
OSPF all IFSM debugging is on
OSPF packet Hello detail debugging is on
OSPF packet Database Description detail debugging is on
OSPF packet Link State Request detail debugging is on
OSPF packet Link State Update detail debugging is on
OSPF packet Link State Acknowledgment detail debugging is on
OSPF all LSA debugging is on