PLANET XGS3-24042 - Manual (Page 234)

12-80
10.0.0.1 255.248.0.0 5
12.2.11 show subnet-vlan interface
Command:
show subnet-vlan interface
Function:
Display the port at IP-subnet-based VLAN.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display the port of enabling IP-subnet-based VLAN, the character in the bracket indicate the ports
mode, A means Access port, T means Trunk port, H means Hybrid port.
Example:
Display the port of enabling IP-subnet-based VLAN currently.
SwitchA#show subnet-vlan interface
Ethernet1/0/1(A) Ethernet1/0/2(A)
Ethernet1/0/3(A) Ethernet1/0/4(A)
Ethernet1/0/5(H) Ethernet1/0/6(T)
12.2.12 subnet-vlan
Command:
subnet-vlan ip-address mask > vlan priority
no subnet-vlan {ip-address mask | all}
Function:
Add a correspondence between the IP subnet and the VLAN, namely add specified IP subnet into
specified VLAN; the “no" form of this command deletes all/the correspondence.
Parameter:
ipv4-address is the IPv4 address shown in dotted decimal notation; the valid range of each section
is 0~255; subnet-mask is the subnet mask code shown in dotted decimal notation; the valid range of
each section is 0~255; priority-id is the priority applied in the VLAN tag with a valid range of 0~7;
vlan-id is the VLAN ID with a valid range of 1~4094;all indicates all the subnets.
Command Mode:
Global Mode.