PLANET XGS3-24042 - Manual (Page 122)

XGS3 Command Guide
3-122
SN Mac Description Hostname
--- ----------------- ------------------------ ------------------------
xxx xx-xx-xx-xx-xx-xx xxxxxxxxxxxxxxxxxxxxxx24 xxxxxxxxxxxxxxxxxxxxxx24
1 00-01-02-03-04-06 XGS3-24042
2 01-01-02-03-04-05 XGS3-24042 MIS_zebra
3.17 show cluster topology
Command:
show cluster topology [root-sn | nodes-sn | mac-address ]
Function:
Display cluster topology information. This command only applies to commander switches.
Parameters:
starting-node-sn：the starting node of the topology.
node-sn-list：the switch node sn.
mac-addr：the CPU mac address of the switch.
No parameters means to display all topology information.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Executing this command on the commander switch will display the topology information with its starting node
specified.
Example:
Execute this command on the commander switch to display the topology information under different conditions.
Switch#show cluster topology
Role: commander(CM);Member(M);Candidate(CA);Other commander(OC);Other member(OM)
LV SN Description Hostname Role MAC_ADDRESS Upstream Upstream leaf
local-port remote-port node
== ============ ============ == ================= ============ ============ =
x xxx xxxxxxxxxx12 xxxxxxxxxx12 xx xx-xx-xx-xx-xx-xx xxxxxxxxxx12 xxxxxxxxxx12 x
1 1 XGS3-24042 LAB_SWITCH_1 CM 01-02-03-04-05-01 -root- -root- -
2 XGS3-24042 LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 N
3 XGS3-24042 LAB_SWITCH_3 CA 01-02-03-04-05-03 eth 1/1 eth 1/3 Y
4 XGS3-24042 LAB_SWITCH_4 CA 01-02-03-04-05-04 eth 1/1 eth 1/4 Y
................................................................................
2 2 XGS3-24042 LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 -
5 XGS3-24042 LAB_SWITCH_1 OC 01-02-03-04-05-13 eth 1/1 eth 1/2 Y