PLANET XGS3-24042 - Manual (Page 616)

36-255
Hello due in 00:00:10 retransmission.
Neighbor Count is 1, Adjacent neighbor count is 1 Numbers of the adjacent layer 3 switch; number of
the layer 3 switches established with neighbor
relation
36.33 show ipv6 ospf neighbor
Command:
show ipv6 ospf [] neighbor [<neighbor_id> | detail | detail ]
Function:
Show OSPF adjacent point messages.
Parameter:
is process tag, which is a character string
<neighbor_id> is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
<ifname> name of the interface
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ipv6 ospf neighbor
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information Explanation
Neighbor ID Neighbor ID
Instance ID Instance ID
Address IP address of neighboring layer 3 switch
Interface Interface the neighbor belongs
State Neighbor relationship state
Pri Priority