PLANET XGS3-24042 - Manual (Page 714)

41-6
-minimum receiving interval, unit is ms, range from 200 to 1000, it may be different for
different devices.
- multiplier of session detection, range from 3 to 50.
Default:
minimum transmission interval is 400ms, minimum receiving interval is 400ms, detection multiplier
is 5.
Command Mode:
Interface configuration mode
Usage Guide:
Configure the minimum transmission interval and the multiplier of session detection for BFD control
packets. The default minimum interval is 400ms and detection multiplier is 5.
Example:
Set the minimum transmission interval and the minimum receiving interval of BFD are 800ms,
detection multiplier is 50 on interface.
s5(config)#in vlan 50
s5(config-if-vlan50)#bfd interval 800 min-rx 800 multiplier 50
s5(config-if-vlan50)#
41.9 bfd min-echo-recv-interval
Command:
bfd min-echo-receive-interval <value>
no bfd min-echo-receive-interval
Function:
Configure the minimum receiving interval for BFD control packets, no command restores its default
value.
Parameter:
- minimum receiving interval, unit is ms, range from 200 to 1000, it may be different for
different devices.
Default:
minimum receiving interval is 400ms.
Command Mode:
Interface configuration mode
Usage Guide:
is minimum receiving interval, unit is ms, range from 200 to 1000, it may be different for
different devices. The default minimum receiving interval is 400ms.
Example: