PLANET XGS3-24042 - Manual (Page 1005)

52-3
Enable the debug information of AAA about receiving and sending packets; the no operation of this
command will disable such debug information.
Parameters:
send: Enable the debug information of AAA about sending packets.
receive: Enable the debug information of AAA about receiving packets.
all: Enable the debug information of AAA about both sending and receiving packets.
<interface-number>: the number of interface.
<interface-name>: the name of interface.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of AAA about sending and receiving packets, users can check
the messages received and sent by Radius protocol, which might help diagnose the cause of faults
if there is any.
Example:
Enable the debug information of AAA about sending and receiving packets on interface1/0/1.
Switch#debug aaa packet all interface Ethernet 1/0/1
52.5 debug aaa detail attribute
Command:
debug aaa detail attribute interface {ethernet <interface-number> | <interface-name>}
no debug aaa detail attribute interface {ethernet <interface-number> | <interface-name>}
Function:
Enable the debug information of AAA about Radius attribute details; the no operation of this
command will disable that debug information.
Parameters:
: the number of the interface.
<interface-name>: the name of the interface.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of AAA about Radius attribute details, users can check Radius
attribute details of Radius messages, which might help diagnose the cause of faults if there is any.
Example:
Enable the debug information of aaa about Radius attribute details on interface 1/0/1.