PLANET XGS3-24042 - Manual (Page 1202)

76-20
Interface Configuration Mode.
Usage Guide:
Set the label retention mode as conservative or liberal. When the label retention mode is changed,
all the sessions on the interface will be created. If the configuration of the interface is different with
the global one, the latter will be ignored. Parameters different with the global configuration can be
used when configuring the interface with this command.
Example:
Set the label retention mode of the interface as conservative.
Switch(config)#int vlan 9
Switch(Config-if-Vlan9)#ldp label-retention-mode conservative
Related Commands:
advertisement-mode, ldp advertisement-mode
76.32 ldp multicast-hellos
Command:
ldp multicast-hellos
no ldp multicast-hellos
Function:
Configure the interface to discover LDP neighbors with multicast Hello messages; the no operation
will cancel the configuration.
Default:
Use the global configuration.
Command Mode:
Interface Configuration Mode
Usage Guide:
LDP can discover its neighbors through multicast Hello messages or specify one via the
“targeted-peer” command. Implementing this command will enable the multicast hello based
neighbor discovery. Implementing the no operation will stop receiving and sending multicast Hello
messages, so that the only way to discover neighbors is “targeted-peer”. Parameters different with
the global configuration can be used when configuring the interface with this command.
Example:
Switch(config)#int vlan 9
Switch(Config-if-Vlan9)#ldp multicast-hellos
Related Commands:
multicast-hellos