PLANET XGS3-24042 - Manual (Page 1172)

74-2
ssh, bgp, bgp4plus, rip, ripng, ospf, ospfv3, pim, pimv6, unknown-mcast, unknow-mcast6, mld;
is the max rate of CPU receiving packets of the protocol type, its range is 1-2000 pps.
Command Mode:
Global Mode
Default:
A different default rate is set for the different type of protocol.
Usage Guide:
The rate limit set by this command have an effect on CPU receiving packets, so it is supposed to be
used with the help of the technical support.
Example:
Set the rate of the ARP packets to 500pps.
Switch(config)#cpu-rx-ratelimit protocol arp 500
74.3 cpu-rx-ratelimit total
Command:
cpu-rx-ratelimit total
no cpu-rx-ratelimit total
Function:
Set the total rate of the CPU receiving packets, the no command sets the total rate of the CPU
receiving packets to default.
Parameter:
is the max number of CPU receiving packets per second.
Command Mode:
Global Mode
Default:
1200pps.
Usage Guide:
The total rate set by the command have an effect on CPU receiving packets, so it is supposed to
be used with the help of the technical support.
Example:
Set the total rate of the CPU receive packets to 1500pps.
Switch(config)#cpu-rx-ratelimit total 1500