PLANET XGS3-24042 - Manual (Page 624)

37-263
MED of routes from different AS source will also be compared.
Example:
The AS (200) receives the same route prefix form the two AS (100 and 300) carrying different MED,
configure the MED comparison is always performed.
Switch(config-router)#bgp always-compare-med
37.5 bgp asnotation asdot
Command:
bgp asnotation asdot
no bgp asnotation asdot
Function:
Show AS number and match the regular expression with ASDOT method. The no command
cancels this method.
Default:
ASPLAIN method.
Command mode:
BGP route mode
Usage Guide:
To change the method that show AS number and match the regular expression, it must configure
“clear ip bgp *” to rebuild all BGP neighbor relationships after this command is configured.
Example:
Show AS number and match the regular expression with ASDOT method.
Switch(config)#router bgp 200
Switch(config-router)#bgp asnotation asdot
37.6 bgp bestpath as-path ignore
Command:
bgp bestpath as-path ignore
no bgp bestpath as-path ignore
Function:
Set to ignore the AS-PATH length. The “no bgp bestpath as-path ignore” command cancels this
configuration.
Default: