PLANET XGS3-24042 - Manual (Page 945)

47-11
Command Mode:
Global mode
Default Configuration:
No access-list configured.
Usage Guide:
When the user assign specific for the first time, ACL of the serial number is created, then the
lists are added into this ACL.
Examples:
Permit the passage of packets with source MAC address 00-00-XX-XX-00-01, and deny passage of
packets with source MAC address 00-00-00-XX-00-ab.
Switch(config)# access-list 700 permit 00-00-00-00-00-01 00-00-FF-FF-00-00
Switch(config)# access-list 700 deny 00-00-00-00-00-ab 00-00-00-FF-00-00
47.8 clear access-group (in | out) statistic interface
Command:
clear access-group (in | out) statistic interface { | ethernet
}
Functions:
Empty packet statistics information of assigned interfaces.
Parameters:
: Interface name.
Command Mode:
Admin mode
Examples:
Empty packet statistics information of interface1/0/1.
Switch#clear access-group out statistic interface ethernet 1/0/1
47.9 firewall
Command:
firewall {enable | disable}
Functions:
Enable or disable firewall.
Parameters: