PLANET XGS3-24042 - Manual (Page 154)

XGS3 Command Guide
7-154
Globally Configuration Mode and Port Configuration Mode.
Usage Guide:
This command can only be effect only if the specified interface is disabled by ULDP.
Example:
To reset all the port which are disabled by ULDP.
Switch(config)# uldp reset
7.13 show uldp
Command:
show uldp [interface ethernet]
Function:
To show the global ULDP configuration and status information of interface. If is specified, ULDP
configuration and status about the specified interface as well as its neighbors’ will be displayed.
Parameters:
is the interface name.
Command Mode:
Admin and Configuration Mode.
Default:
None.
Usage Guide:
If no parameters are appended, the global ULDP information will be displayed. If the interface name is specified,
information about the interface and its neighbors will be displayed along with the global information.
Example:
To display the global ULDP information.
Switch(config)# show uldp