PLANET XGS3-24042 - Manual (Page 671)

37-310
37.76 neighbor timers
Command:
neighbor {<ip-address>|>} timers <0-65535> <0-65535>
no neighbor {|} timers <0-65535> <0-65535>
Function:
Configure the KEEPALIVE interval and hold time; the “no neighbor {|} timers
<0-65535> <0-65535>” command restores the defaults.
Parameter:
<ip-address>Neighbor IP address
: Name of peer group
<0-65535>: Respectively the KEEPALIVE and HOLD TIME
Default:
Default KEEPALIVE time is 60s, while HOLD TIME is 240s.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
Send KEEPALIVE interval and HOLD TIME intervals sent in the peer connection. The hold time is
the time period for maintain the connection when no message is received from the partner (such as
KEEPALIVE). And the connection will be closed after this hold time.
Example:
Switch(config-router)#neighbor 10.1.1.64 timers 50 200
Relevant Commands:
neighbor timers connect, timers bgp, no timers bgp
37.77 neighbor timers connect
Command:
neighbor {|} timers connect <0-65535>
no neighbor {|} timers connect [<0-65535>]
Function:
Configure the connecting retry time interval. The “no neighbor {|} timers
connect [<0-65535>]” command restores the default value.
Parameter:
: Neighbor IP address
: Name of peer group