18 show telnet login, 19 who, 3 commands for configuring switch ip – PLANET XGS3-24042 User Manual
Page 79: 1 interface vlan, 18 show telnet login -79, 19 who -79, Ommands for, Onfiguring, Witch, Ip -79
XGS3 Command Guide
1-79
1.2.18 show telnet login
Command:
show telnet login
Function:
Display the information of the Telnet client which currently establishes a Telnet connection with the switch.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Check the Telnet client messages connected through Telnet with the switch.
Example:
Switch #show telnet login
Authenticate login by local
Login user:
aa
1.2.19 who
Command:
who
Command mode:
All configuration modes
Example:
Show the current login users with vty.
Switch #who
Telnet user a login from 192.168.1.20
1.3 Commands for Configuring Switch IP
1.3.1 interface vlan
Command:
interface vlan
no interface vlan
Function:
Enter the VLAN interface configuration mode; the no operation of this command will delete the existing VLAN
interface.