PLANET XGS3-24042 - Manual (Page 149)

XGS3 Command Guide
7-149
Disabled.
Usage Guide:
Use this command to display the error message.
Example:
Display the error message.
Switch#debug uldp error
7.3 debug uldp event
Command:
debug uldp event
no debug uldp event
Function:
Enable the message debug function to display the event; the no form command disables this function.
Command Mode:
Admin Mode.
Default:
Disabled.
Usage Guide:
Use this command to display all kinds of event information.
Example:
Display event information.
Switch# debug uldp event
7.4 debug uldp fsm interface ethernet
Command:
debug uldp fsm interface ethernet >
no debug uldp fsm interface ethernet <IFname>
Function:
To enable debugging information for ULDP for the specified interface. The no form of this command will disable the
debugging information.
Parameters:
> is the interface name.
Command Mode:
Admin Configuration Mode.