PLANET XGS3-24042 - Manual (Page 177)

11-23
11.3 debug ethernet-oam fsm
Command:
debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet |} <IFNAME>]
no debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet |} <IFNAME>]
Function:
Enable the debugging of OAM state machine, no command disables it.
Parameter:
: name of the port that the debugging will be enabled or disabled
Command Mode:
Admin mode
Example:
Enable the debugging of Discovery state machine for ethernet1/0/1.
Switch#debug ethernet-oam fsm Discovery interface ethernet1/0/1.
11.4 debug ethernet-oam packet
Command:
debug ethernet-oam packet [detail] {all | send | receive} [interface {ethernet |} <IFNAME>]
no debug ethernet-oam packet [detail] {all | send | receive} interface {ethernet |} <IFNAME>
Function:
Enable the debugging of packets received or sent by OAM, no command disables the debugging.
Parameter:
<IFNAME>: name of the port that the debugging will be enabled or disabled
Default:
Disable.
Command Mode:
Admin mode
Example:
Enable the debugging of packets received or sent for ethernet1/0/1.
Switch#debug ethernet-oam packet detail all interface1/0/1