PLANET XGS3-24042 - Manual (Page 651)

37-290
{|} capability orf prefix-list {||}” command set to
not perform the negotiation.
Parameter:
: Neighbor IP address.
: Name of peer group.
Default:
ORF capability not configured.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
This is an extended BGP capability. With this configuration supported capabilities by both side will
be negotiated in the OPEN messages, and the partner will respond if this capability is supported by
the partner and send NOTIFICATION if not. The originating side will then send an OPEN excluded
the capability to reestablish the connection. With this capability, the side configured with in prefix-list
filter rules will transmit its own filter rules to the peer, the peer group will apply this rule as its own out
rules, so to avoid sending route which will be denied by the partner.
Example:
Set to perform the out route filter capability negotiation with neighbor 10.1.1.66.
Switch(config-router)#neighbor 10.1.1.66 capability orf prefix-list both
Relevant Commands:
neighbor capability, no neighbor capability
37.49 neighbor collide-established
Command:
neighbor {|} collide-established
no neighbor {|} collide-established
Function:
Enable the collision check and settlement in the TCP connection collision. The “no neighbor
{|} collide-established” command disables the TCP connection collision
settlement.
Parameter:
: Neighbor IP address.
: Name of the peer.
Default:
Disabled and Unavailable.
Command Mode: