PLANET XGS3-24042 - Manual (Page 1147)

72-3
no clock summer-time
Function:
Configure the recurrent summer time range, the time in this range is summer time.
Parameter:
is the time zone name of summer time; <HH:MM> is the start time, the format is hour(from
0 to 23):minute(from 0 to 59); <week> is the week from 1 to 4, first or last; <day> is the week value,
the value as “Sun”, “Mon”, “Tue”, “Wed”, “Thu”, “Fri”, “Sat”; <month> is the month, the value
as ”Jan”, “Feb”, “Mar”, “Apr”, “May”, ”Jun”, “Jul”, “Aug”, “Sep”, “Oct”, “Nov”, “Dec”; <HH:MM> is the
end time, the format is hour(from 0 to 23):minute(from 0 to 59); <week> is the week from 1 to 4, first
or last; <day> is the week value, the value as “Sun”, “Mon”, “Tue”, “Wed”, “Thu”, “Fri”, “Sat”;
<month> is the month, the value as ”Jan”, “Feb”, “Mar”, “Apr”, “May”, ”Jun”, “Jul”, “Aug”, “Sep”,
“Oct”, “Nov”, “Dec” <offset> is the time offset, the range from 1 to 1440, unit is minute, default value
is 60 minutes.
Default:
There is no summer time range.
Command Mode:
Global Mode
Usage Guide:
This command sets the start and end time for the recurrent summer time flexibly. When the system
time reaches to the start time point of summer time, the clock is changed and increase
value, the system enters summer time. When the system time reaches to the end time point of
summer time, the clock is changed again, subtract value from system time, the system
finishes summer time. There is no relation between the recurrent summer time to the year, the
system clock will be changed when it reaches to the start and the end time point of summer time
year after year. This command supports summer time of southern hemisphere.
Example:
Configure summer time at 12:10 from the first Monday of april to the last Saturday of augest year
after year, offset value as 70 minutes, summer time is named as aaa.
Switch(config)#clock summer-time aaa recurring 12:10 1 mon apr 12:10 last sat aug 70
Chapter 72 Commands for Show
72.1 clear history all-users
Command: