Chapter 12 vlan configuration, 1 commands for vlan configuration, 1 debug gvrp event – PLANET XGS3-24042 User Manual
Page 200: 2 debug gvrp packet, Chapter 12 vlan configuration -46, Ommands for, Vlan, Onfiguration, 1 debug gvrp event -46, 2 debug gvrp packet -46
12-46
Chapter 12 VLAN Configuration
12.1 Commands for VLAN Configuration
12.1.1 debug gvrp event
Command:
debug gvrp event interface (ethernet | port-channel |) IFNAME
no debug gvrp event interface (ethernet | port-channel |) IFNAME
Function:
Enable/disable GVRP event debugging including the transfer of state machine and the expiration of
timer.
Parameter:
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command mode:
Admin Mode.
Default:
GVRP event debugging is disabled.
Usage Guide:
Use this command to enable GVRP event debugging.
Example:
Show GVRP event debugging.
Switch(config)#debug gvrp event interface ethernet 1/0/1
%Jan 16 02:25:14 2006 GVRP EVENT: LO -> VO ，interface ethernet 1/0/1, vlan 100
%Jan 16 02:35:15 2006 GVRP EVENT: join timer expire，interface ethernet 1/0/1
12.1.2 debug gvrp packet
Command:
debug gvrp packet (receive | send) interface (ethernet | port-channel |) IFNAME
no debug gvrp packet (receive | send) interface (ethernet | port-channel |) IFNAME
Function:
Enable/disable GVRP packet debugging.