PLANET XGS3-24042 - Manual (Page 1191)

76-9
Default:
No display of debug information.
Command Mode:
Admin Mode.
Usage Guide:
Implementing this command will display the debug information of the LDP state machine.
Example:
Enable the debug switch.
Switch#debug ldp tsm
76.16 debug ldp usm
Command:
debug ldp usm
no debug ldp usm
Function:
Display the debug information of the LDP upstream state machine.
Default:
No display of debug information.
Command Mode:
Admin Mode.
Usage Guide:
Implementing this command will display the debug information of the LDP upstream state machine.
Example:
Enable the debug switch.
Switch#debug ldp usm
76.17 ldp {enable|disable}
Command:
ldp {enable|disable}
Function:
Enable the LDP protocol on the interface.
Default:
The LDP is disabled.