PLANET XGS3-24042 - Manual (Page 814)

44-89
: specified priority, range from 0 to 7
Command Mode:
Global Mode
Usage Guide:
The command configuration modifies to a specified value through the switch matching priority of
specified range multicast data packet, and the TOS is specified to the same value
simultaneously.Carefully, the packet transmitted in UNTAG mode does not modify its priority.
Example:
Switch(config)#ip multicast policy 10.1.1.0/24 225.1.1.0/24 cos 7
44.8.7 ip multicast source-control
Command:
ip multicast source-control
no ip multicast source-control
Function:
Configure to globally enable multicast source control, the “no ip multicast source-control”
command restores global multicast source control disabled.
Default:
Disabled
Command Mode:
Global Mode
Usage Guide:
The source control access-list applies to interface with only enabling global multicast source control,
and configure to disabled global multicast source control without configuring source control
access-list on every interface. After configuring the command, multicast data received from every
interface does not have matching multicast source control list item, and then they will be thrown
away by switches, namely only multicast data matching to PERMIT can be received and forwarded.
Example:
Switch(config)#ip multicast source-control
44.8.8 ip multicast source-control access-group
Command:
ip multicast source-control access-group <5000-5099>
no ip multicast source-control access-group <5000-5099>