PLANET XGS3-24042 - Manual (Page 947)

47-13
47.11 ip access standard
Command:
ip access standard <name>
no ip access standard <name>
Function:
Create a named standard access list. The no prefix will remove the named standard access list
including all the rules in the list.
Parameters:
<name> is the name of the access list. The name can be formed by non-all-digit characters of
length of 1 to 32.
Command Mode:
Global Mode.
Default:
No access list is configured by default.
Usage Guide:
When this command is issued for the first time, an empty access list will be created.
Example:
To create a standard IP access list name ipFlow.
Switch(config)#ip access-list standard ipFlow
47.12 ipv6 access-list
Command:
ipv6 access-list {deny | permit} {> | any-source |
{host-source }}
ipv6 access-list <num-ext> {deny | permit} icmp {{ /sPrefixlen> } | any-source |
{host-source }} { | any-destination | {host-destination
}} [ [ ]] [dscp ] [flow-label ][time-range
]
ipv6 access-list {deny | permit} tcp {{ } | any-source |
{host-source }} [s-port { > | range > }]
{{ } | any-destination | {host-destination > }} [dPort
{ | range <dPortMin> > }] [syn | ack | urg | rst | fin | psh] [dscp ]
[flow-label ][time-range ]
ipv6 access-list {deny | permit} udp {{ } | any-source |