29 ip pim rp-candidate, 29 ip pim rp-candidate -36 – PLANET XGS3-24042 User Manual

Page 761

44-36

<A.B.C.D> is the RP address

<A.B.C.D/M> the scope of the specified RP address

<all> is all the range

Default:

This switch is not a RP static router.

Command Mode:

Global Mode

Usage Guide:

This command is to configure static RP globally or in a multicast address range and configure

PIM-SM static RP information. Attention, when computing rp, BSR RP is selected first. If it doesn’t

succeed, static RP is selected.

Example:

Configure vlan1 as candidate RP announcing sending interface globally.

Switch (config)# ip pim rp-address 10.1.1.1 238.0.0.0/8

Switch (config)#

44.3.29 ip pim rp-candidate

Command:

ip pim rp-candidate {vlan <vlan-id> | } [<A.B.C.D/M>] []

no ip pim rp-candiate

Function:

This command is the candidate RP global configure command, it is used to configure PIM-SM

candidate RP information in order to compete RP router with other candidate RPs. The “no ip pim

rp-candiate” command cancels the candidate RP.

Parameter:

vlan-id isVlan ID;

ifname is the name of the specified interface;

A.B.C.D/M is the ip prefix and mask;

is the RP selection priority, it ranges from 0 to 255, the default value is 192, the lower