PLANET XGS3-24042 - Manual (Page 1127)

69-1
Chapter 69 Commands for NTP
69.1 clock timezone
Command:
clock timezone WORD {add | subtract} <0-23> [<0-59>]
no clock timezone WORD
Function:
This command configures timezone in global mode, the no command deletes the configured
timezone.
Parameters:
WORD: timezone name, the length should not exceed 16
add | subtract: the action of timezone
<0-23>: the hour value
<0-59>: the minute value
Command Mode:
Global mode
Usage Guide:
The timezone name is invalid with the blank, the hour and minute value must be in the specific
range.
Example:
Configure the action as add for the eighth timezone globally.
Switch(config)#clock timezone aaa add 8
69.2 debug ntp adjust
Command:
debug ntp adjust
no debug ntp adjust
Function:
To enable/disable the debug switch of displaying local time adjust information.
Default:
Disabled.
Command Mode: