PLANET XGS3-24042 - Manual (Page 249)

13-95
switchport port-security mac-address <mac-address>
no switchport port-security mac-address <mac-address>
Function:
Add a static secure MAC address; the “no switchport port-security mac-address” command
deletes a static secure MAC address.
Command mode:
Port Mode.
Parameters:
<mac-address> stands for the MAC address to be added or deleted.
Usage Guide:
The MAC address binding function must be enabled before static secure MAC address can be
added.
Example:
Adding MAC 00-30-4f-FE-2E-D3 to port1.
Switch(config)#interface Ethernet 1/0/1
Switch(Config-If-Ethernet1/1)#switchport port-security mac-address 00-30-4f-FE-2E-D3
13.2.10 switchport port-security maximum
Command:
switchport port-security maximum <value>
no switchport port-security maximum
Function:
Sets the maximum number of secure MAC addresses for a port; the “no switchport port-security
maximum” command restores the maximum secure address number of 1.
Command mode:
Port Mode.
Parameter:
< value> is the up limit for static secure MAC address, the valid range is 1 to 128.
Default:
The default maximum port secure MAC address number is 1.
Usage Guide:
The MAC address binding function must be enabled before maximum secure MAC address number
can be set. If secure static MAC address number of the port is larger than the maximum secure
MAC address number set, the setting fails; extra secure static MAC addresses must be deleted, so
that the secure static MAC address number is no larger than the maximum secure MAC address