PLANET XGS3-24042 - Manual (Page 1032)

56-3
The max binding number of MAB is 3.
Usage Guide:
Set the max binding number of MAB. When the binding number reaches to the max value, the port
will stop binding, if the max binding number is less than the current binding number of the port, the
setting will be unsuccessful.
Example:
Configure the max binding number as 10.
Switch(Config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#mac-authentication-bypass binding-limit 10
56.5 mac-authentication-bypass enable
Command:
mac-authentication-bypass enable
no mac-authentication-bypass enable
Function:
Enable the global and port MAB function. The no command disables MAB function.
Command Mode:
Global Mode and Port Mode
Default:
Disable the global and port MAB function.
Usage Guide:
To process MAB authentication of a port, enable the global MAB function first, and then, enable the
MAB function of the corresponding port.
Example:
Enable the global and port Eth1/0/1 MAB function.
Switch(Config)#mac-authentication-bypass enable
Switch(Config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#mac-authentication-bypass enable
56.6 mac-authentication-bypass guest-vlan
Command:
mac-authentication-bypass guest-vlan <1-4094>
no mac-authentication-bypass guest-vlan